Pages - Menu

Sunday, September 24, 2017

Physics v4.2 Snow Edition

This mod based on Momo’s physic mod but has a little bit adjusts wheel slip effect to simulate driving in the snow as in real life. If you want snow fall effect, you’re gonna need another weather mod.

Instructions:

  • Give this mod TOP priority above all other mods.
  • Enable “Physics Camera” and slide its bar to max.
  • “Trailer Stability” set to min.
  • You may need to test to re-adjust the steering sensitivity/non linearity depending on your controller.
  • For 900 degree wheels, 0% sensitivity and 0 – 5% non-linearity.
  • For 270 degree wheels, 50% sensitivity and 100% non-linearity.
  • “Braking intensity” recommended at 10 – 15% for Logitech Steering Wheels.
  • For users who use a keyboard or joypad to steer, you may need to test and re-adjust the scale.

Note:

  • NOT compatible with any other physics mod.
  • NOT compatible with my “Driver Seat” mod.
  • All original SCS trucks fully compatible.
  • Fully Compatible with Scania RJL.

Optional customize (If you want to experience even smoother and less twitchy steering)

  1. Find a file named “Control.txt” in your profile folder (My document > Euro Truck > Profile). And copy it to a safe place just in case. If you don’t like the change you can take the old file back.
  2. Open the file, find a line that says :
    “mix steering `dsteering – (pow(normalize(abs(sel(c_jisteer, -j_steer?0, j_steer?0)), c_steer_dz), (1.0 + c_steer_func * 0.5)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0)))`”
  3. Replace that line with the following line:
    “mix steering `dsteering – (0.58 * normalize(abs(j_steer?0), c_steer_dz) + (0.42 * (c_steer_func / 2)) * pow(normalize(abs(j_steer?0), c_steer_dz), 4)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0))`”
  4. Save the file. And run the game normally.
  5. Set the “non-linearity” and “sensitivity” to 100%.
  6. It’s done. Drive and see if you like the new steering.

Credits: Momo’s
Compatibility: ETS2 v1.28.x

Screenshots:

How to install mod for ETS 2:

  1. Download this mod.
  2. Extract it!
  3. Paste the .scs file(s) into your My Documents/Euro Truck Simulator 2/mod folder.
  4. Run game ~> Mod Manager ~> Enable mod.
  5. Enjoy!

Download Physics v4.2 Snow Edition for ETS 2:

 

Source: Physics v4.2 Snow Edition



Source: ETS2 Mods http://ets2downloads.com/misc/physics-v4-2-snow-edition

No comments:

Post a Comment